ZhongFeng Electronic Technology Co., Limited
As far as quality, this kit is intended for fine electronic soldering repair. I plan on using it to repair a few XLR cables I have that need a quick solder. I anticipate using the fine tips for wood etching as well. For quick touch ups on stained glass pieces this would be ok, but as a long term heavy use product, you would want to jump into the professional level soldering tools. It also comes with its own zip up carrying case. I received this product at a discounted price and it did not effect my straightforward review of the product. For more information and purchase: am including the general directions on how to properly use this product in this case because I feel it is important to follow the manufacturer’s directions carefully to avoid accidents.How to Use the Solder Gun:1. Prepare solder and soldering iron; Especially important: it’s necessary to keep the tip clean, which should be coated with solder.2. Use the soldering iron to heat the element, such as PCB leads and pads, and keep the element heated evenly.3. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely4. Please remove the solder wire when the tin is enough.5. Take away the soldering iron in a direction approximately 45 ° and power off.When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a short while and a smoke won’t come out again. Please keep the tips coated with solder constantly.Please be really careful when you are using the tools or put them out from or back to the carrying bag in avoidance of pricks or other injuries.Please keep it away from children when it is working. Adjustable Temperature Controlled from (200℃ – 450℃ / 392℉ – 842℉ )Works at adjustable temperatures from (200℃ – 450℃ / 392℉ – 842℉ ), which is able to adjust temp easily for your needs. Use the soldering iron to heat the element, such as PCB leads and pads, and keep the element heated evenly. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely. For safety reasons, please keep it away from children when it is in use. Unit heats up quickly, premium ceramic heating core, great heat conduction, and stable performance.EZYKOO 60w 110v soldering iron heats up very fast with inner-heated ceramic induction technology and it has a temperature dial with the range from 200℃ to 450℃ for you to adjust temperature easily. Durable heat-insulated silicon handles heat efficiently to protect the handle from melting due to the high temperature to avoid the plastic melting from high heat. Please be careful when you are using the tools and put them back into the carrying bag after the iron has cooled down to room temperature to avoid injuries.EZYKOO Soldering Gun Has a LED Indicator And a Heat Insulation Rubber, with 4 Ventilation Holes of The Solder Tip for Better Dissipate Heat.